FIND THE PARTS YOU NEED

  Home > Digitizers > Apple >

  Apple iPhone 3GS Digitizer Touch Panel & Glass Lens with Adhesive - Replacement Part
  Apple iPhone 3GS Digitizer Touch Panel & Glass Lens with Adhesive
Apple iPhone 3GS Digitizer Touch Panel & Glass Lens with Adhesive


Bookmark and Share
 
Alternative Views:
Condition: Aftermarket

Item# Item Name Qty Add
APPL8001572-23 Apple iPhone 3GS Digitizer Touch Panel & Glass Lens with Adhesive - Replacement Part - Black - Non-QuickShip
APPL8001572-23QS Apple iPhone 3GS Digitizer Touch Panel & Glass Lens with Adhesive - Replacement Part - Black - QuickShip
If prices are hidden, please log-in


Product Features:

  • About The Apple iPhone 3GS Digitizer Touch Screen:

    iPhone 3GS Digitizer is only available in black. Different from iphone 2g lcd assembly, the digitizer and lcd screen of iphone 3g are not factory adhered. That means they can be separately replaced. So if only the digitizer is damaged but the lcd works normally, there is no need to replace both of them, and also no need to worry about the cost of replacement since the digitizer itself is much cheaper than the lcd and digitizer assembly. It is also true for the Iphone 3G Digitizer Touch Screen.

  • Condition: OEM, New Or Reclaimed A Stock

  •  
    Oem Apple Iphone 3gs Digitizer Touch Screen is an original product from apple factory in its real sense. It has a longer life than aftermarket touch screen. To ensure that the 3gs digitizers we ship are quite qualified, we always do a series of strict tests: dialing, sending sms, and calculating through touch to see if the touch response is sensitive; testing the gravity sense function; sliding with finger on the digitizer swiftly to check if the phone crashes. Apart from ensuring the function, we also ensure that every 3gs digitizer we ship has no cosmetic problem.

  • iPhone 3GS Digitizer Touch Screen Special Notes:

    The flex cable ribbon of 3gs Digitizer Touch Screen is vulnerable, so focus and carefulness is quite necessary during the installation. It must be ensured that the buckle is fastened to the motherboard. Sometimes, the buckle may be loosened during using the phone. To solve the problem, we must use a kind of small shock-proof rubber mat that can be adhered to the buckle. It enables the buckle to be fastened more tightly. When the replacement is finished, the iPhone 3g Screen protector should better be used to prevent scratch.
  •  

  • iPhone 3GS Digitizer Touch Screen Compatablity:

  • Apple iPhone 3GS(16GB)
    Apple iPhone 3GS (32GB)

  • How to identify the OEM iPhone 3GS Digitizer and Aftermarket iPhone 3GS Digitizer :

  • Global Direct Parts has strict and systematic QC process to ensure that every customer can get quality-assured products. Now we would like to share some tips on how to identify the OEM and Aftermarket iPhone 3GS digitizer. Basically, there are three aspects that which you should pay more attention to: the Flex cable, Glass lens and Part Numbers.

  •  Firstly, different technologies and materials are adopted in the process of manufacturing the OEM and Aftermarket iPhone 3GS digitizer flex ribbons. Due to this reason, clip connectors at the end of their flex ribbons are a little different.
    And the parts numbers printed on the ribbons are definitely not the same between the OEM and the non-OEM products.
  •  

  • The third way to identify their difference is to check the proximity sensor holes and indicator light hole. The glass on the aftermarket iPhone 3GS digitizer has a higher transmittance than the OEM one. Thus, the aftermarket digitizer has a worse performance so far as the light sensitivity is concerned.
  •  
  •  
  • Additionally, seen from the angle of the cross section under light, the OEM iPhone 3GS digitizer looks much purer and clearer than the aftermarket digitizer.
  •  

  • Lastly, there is a rumored way to distinguish the two kinds of digitizers: slightly tap the digitizer against a table and listen to the sound. The OEM iPhone 3GS digitizer produces a dull sound while the sound made by the aftermarket digitizer is much crisp.
  •  
  •  
  • Every Global Direct Part is quality control tested before shipping so you know when you get your part it is ready to install. Due To Our Strict Quality Control Procedures S & H times can vary. Please read Terms Of Use before purchasing.




Technical Specs:

  • iPhone 3GS Digitizer Touch Screen Specifications:

    Size: 3.5 inches
    The buckle of 3gs Digitizer is smaller than that of 3g Touch Screen, so they are not compatible.




Take Apart Guidelines:
Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Digitizers > Apple
Apple > Apple iPhone 3GS
Volume Quantity Price
Featured Categories
Featured Categories > Apple
US QuickShip Inventory


OEM BlackBerry Bold 9650 Charging Port - Replacement Part (login to view price)
OEM Samsung Gravity T459 Flex Cable Ribbon - Replacement Part (login to view price)
OEM HTC Touch Pro2 Charging Port (T-Mobile) - Replacement Part (login to view price)
Case Opening Tool For Cell Phone-Cross - Replacement Part (login to view price)
OEM Samsung Behold SGH-T919 LCD & Digitizer - Replacement Part (login to view price)
OEM BlackBerry Storm 9500, 9530 Bezel Set with Top Cover and Navigator Keyset - Replacement Part (login to view price)
OEM Samsung Intensity SCH-U450 QWERT Keypad - Replacement Part (login to view price)
OEM Apple iPad Digitizer Touch Panel - Replacement Part (login to view price)