|
The video above is an guideline about how to take apart the iPhone 4:
Step one: remove the screws on the iPhone 4 middle chrome ring, and remove the iPhone 4 battery door by pushing the battery cover upward.
Step two: remove the screws first and then remove the iphone 4 metal piece covering, the iPhone 4 camera, the iPhone 4 front speaker.
Step three: remove the iPhone 4 earphone jack.before using the tweezer to take the headphone jack away, you need remove the screws first.
Step four: remove 2 metal covers on the sim card board and remove the iPhone 4 battery.
Step five: disconnect all flex cables on the top of this iphone 4 and take the iPhone 4 camera away.
Step six: remove the iPhone 4 sim card board.First use the sim card ejection tool to remove the iPhone 4 sim card tray. Then disconnect the iPhone 4 charge port flex cable and a small flex cable. Next, remove the screws, now you can remove the sim card board.
Step seven: remove the iPhone 4 LCD assemblyBefore removing the iPhone 4 LCD assembly, remove the plastic board over the charge port. And remove all the visible screws again on the middle chrome ring. Disconnect the iPhone 4 home button flex.Now turn to the front side, use a suction cup tool to lift the LCD assembly from the area close to the iPhone 4 home button. And bent the LCD flex cable to an appropriate angel. Please try to do it gently and slowly. Use a tool to separate the LCD assembly and the iPhone 4 middle plate, now the iPhone 4 LCD assembly is removed.
Last step: remove the iPhone 4 charge port flex cable.
Alright, All pieces of the iPhone 4 has been taken apart.
|
