Product Status: Original OEM Tested, New or Like New Condition

This part is an original OEM Tested Part in New, Like New or A Stock Condition

OEM Motorola MB501, Cliq XT, Quench Digitizer Touch Panel with Front Housing (A Stock) Overviews:The Motorola Cliq XT Digitizers we supply all incorporate the front cover. They are more convenient for installation than the single digitizers. Similar to the moto cliq touch screen, there is a T-Mobile logo at the bottom of the Clip XT digitizer. A StockThis OEM Motorola MB501, Cliq XT, Quench Digitizer Touch Panel with Front Housing (A Stock) Includes Front Cover and Digitizer Touch Panel. They are a little different in shape. The glass lens on the Cliq XT Touch Screen is designed with curved top and bottom edges while the Motorolar cliq digitizer is designed with horizontal edge at the bottom.Another difference of them lies in that the M logo is printed on the front cover of the Motorola cliq xt digitizer whereas for the cliq the logo is printed below the glass lens. Motorola Cliq XT Digitizer Touch Screen Specification:Size: 3.1 inchesType: capacitive Motorola Cliq XT Digitizer Touch Screen Installation Special Notes:The Cliq XT Digitizer Flex Cable Ribbon is long with a wide buckle at the end thus it is easier to handle it than handle the Moto Cliq Digitizer. Still, one must ensure the Ribbon is fastened to the Motherboard. When assembling the touch screen with the cliq xt lcd, try to clean the digitizer carefully. It should also be noted that the screw holes on the front cover are a little protruding. Please handle the xt digitizer carefully in order to protect the electronic components from being damaged by the screw holes. Motorola Cliq XT Digitizer Touch Screen Compatibility:The Moto Cliq Xt Digitizer has the same size as the moto cliq digitizer, but their ribbons are different, so they are not compatible. Motorola Cliq XT Digitizer Touch Screen Storage Guidelines:Similar to other touch screens, the Cliq Xt Digitizer Touch Screens should not be placed in a pile. It is advisable to wrap them in separate bubble wraps and place them on-edge. Use a little alcohol ethyl or S-530 cleaning agent to wipe the digitizer or the ribbon if they are infected with dust.