Product Status: Original OEM Tested, New or Like New Condition

This part is an original OEM Tested Part in New, Like New or A Stock Condition

The Motorola i1 Digitizer|Touch Screen Overview:The Motorola i1 touch screen is quite different from other Motorola touch screens. Most Motorola digitizer flex cables stretch out from the top side or the lateral side, while the Motorola i1 touch screen flex stretches out from the bottom side of the touch screen. This design technology is the same as the Motorola cliq touch screen.


The Motorola I1 touch screen features four touch button icons at the bottom. The i1 digitizer touch screen looks quite similar to the cliq digitizer except that there is a trapezoidal notch on the top and a semi-circular notch at the bottom of the Motorola i1 touch screen.
Motorola i1 Digitizer|Touch Screen Specifications:Touch Screen Specifications:Size: 3.1 inchesType: capacitiveThe Motorola Cliq touch screen compared to the Motorola i1 Touch ScreenThe main touch screen size: 3.1 inches
Motorola i1 Digitizer|Touch Screen Installation Special Notes:When installing the Motorola I1 touch screen, it is advisable to adhere the touch screen adhesive to A Cover to avoid it being damaged. If the adhesive is adhered to the back of the digitizer directly, the part may be easily scratched if some collision happened.Since Motorola I1 Touch Screen flex cable ribbon is bent and factory adhered to the glass, master the force properly during the installation to avoid breaking off the flex cable ribbon.
Motorola i1 Digitizer|Touch Screen Compatibility:Compatible only with the Motorola i1
Motorola i1 Digitizer|Touch Screen Storage Guidelines:Please refer to the storage guidelines for the Motorolacliq touch screen. Note that the Motorola i1 Touch Screen flex cable ribbon must be put upwards in order to prevent breaking the ribbon.